94 civic ex

We may earn a small commission from affiliate links and paid advertisements. Terms

emomelodic

Junior Member
hello all, i was wondering what else i will need to run a turbo on my d16
i have a garrett t3 turbo
20psi gateway
greddy intercooler
dsm bov 1g
dsm 450cc injectors
and some piping


what else am i going to need to get it working right, and where can i get it?
thanks
-emo- :ph34r:
 
Exhaust manifold? And what kind of fuel management will you be useing? And with that said how much boost on what engine where you gonna run?
 
a manifold, something to control those injectors like vafc, uberdata, hondata
downpipe/exhaust stuff
oil lines, fittings
water lines/fittings if the turbo is also water cooled.

and toss that gateway- thats for computers.
get a wastegate :)
 
Originally posted by pissedoffsol@Aug 30 2004, 03:02 PM
a manifold, something to control those injectors like vafc, uberdata, hondata
downpipe/exhaust stuff
oil lines, fittings
water lines/fittings if the turbo is also water cooled.

and toss that gateway- thats for computers.
get a wastegate :)
[post=383803]Quoted post[/post]​



do you have a pref on a controller?
and do you know where to pick up a turbo manafold, downpipe?
turbo is oil fed. so i suppose i need to get an oil line and then a new oil pan. do i need a pump from the pan to the turbo?
thanks
-emo
 
you don't need a new pan, you just need to tap your pan for the oil return

the oil for the turbo doesn't come from the pan, it usually comes from somewhere on the block

IMO the sandwhich plate (that I think B is using) fits between the oil filter and block and provides fittings for both oil feed and an oil pressure sensor

that's the easiet way to do it, since drilling and tapping aluminum blocks is no fun at all- if you're interested in going that route i'm sure B can hook you up with the link
 
Back
Top