drtysohc
New Member
This is the first swap that i've attempted, with that being said...i have searched both on this site and honda-tech with no luck. It is probably a stupid question, but is it possible to just use the entire engine harness from the integra, or would it just be easier to go ahead and extend the wires that i need, and add the wiring for VTEC and knock sensor? I'm just worried that I won't be able to get the butterfly's to work on the stock manifold with a harness other than the stock GSR, and the harness that is in the car is pretty hacked up from my old turbo single cam (DSM injectors with resister box, 2 wire iacv, a screwed up VSS plug and so on). Anyways, if it is possible to go ahead and use the GSR harness, i will...but i will have to drive an hour and a half to get the rest of it, since i'm a dumbass and didn't pull the entire thing out of the car I just don't want to waste 50 bucks in gas for something useless.
Anyhow, any help that you guys can provide will be appreciated...
Thanks,
-Steve
Anyhow, any help that you guys can provide will be appreciated...
Thanks,
-Steve