Aem pulleys squealing under load??

[ryangt]

i have an aem power steering pulley on my supercharged 01 prelude, the belts squeal on hard acceleration, the belts are all new, has anyyone had problems with the pulleys?? should i just go back to stock ones??
any advice would be greatly appreciated

 

[MXDesa]

Adjust them tighter until the squealing is gone. Pulleys dont cause squeals, incorrect tension does

 

[ryangt]

i tightened it pretty good, and the tension seemed about right, maybe they need to be tighter with these pulleys im not sure.

 

[posol]

or, the different crank pulley that jackson uses has made the pws pulley slightly off-straight.

 

[ryangt]

hmm so should i try to use a stock pulley since maybe the aem one is a little farther out?? i looked at the belts while the motor was running, and didnt see any type of deflection or wobble but maybe i should just try it first and see if it helps does anyone have a ps pulley?

 

[posol]

while running, and in neutral, blip the throttle body by hand... see if you can see it flex and hear the squell