We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by Calesta@Mar 9 2004, 05:28 PM
Ok, so how do you explain the B16 header working on the B18A/B and the B20B/Z even though their deck height is the same as the B18C?
Originally posted by Smonkeyboy@Mar 8 2004, 08:11 PM
NO NO NO NO NO
a B16 header will NOT bolt up to a B18
however a B18A/B will bolt up to a B18C or B16B
the block on the B16A is physically 8mm shorter than ALL other Bseries. so a B16 header will not bolt up to any other Bseries motors, and any B18 header will not bolt up to a B16.
Originally posted by MONKEYTUNER+Mar 10 2004, 10:32 AM-->Smonkeyboy@Mar 8 2004, 08:11 PM
NO NO NO NO NO
a B16 header will NOT bolt up to a B18
however a B18A/B will bolt up to a B18C or B16B
the block on the B16A is physically 8mm shorter than ALL other Bseries. so a B16 header will not bolt up to any other Bseries motors, and any B18 header will not bolt up to a B16.
I disagree I am running my b16a headr on a b16a gen1 motor with no probs.
Originally posted by Smonkeyboy@Mar 8 2004, 08:11 PM
NO NO NO NO NO
a B16 header will NOT bolt up to a B18
however a B18A/B will bolt up to a B18C or B16B
the block on the B16A is physically 8mm shorter than ALL other Bseries. so a B16 header will not bolt up to any other Bseries motors, and any B18 header will not bolt up to a B16.
the block on the B16A is physically 8mm shorter than ALL other Bseries.
Originally posted by 90crxb18@Mar 17 2004, 04:45 PM
the block on the B16A is physically 8mm shorter than ALL other Bseries.
ok so i should have an extra 8mm if i take the one off my b18 an put it on my b16