Hey all, I have a b16a in a 90 DX hatch that won't start. I have checked and double checked everything, but it's just not happening. I have spark, I have compression, I have even used a NOID light to make sure that the injectors are getting pulses from the ecu. I have done the DX-MPFI swap lots of times, so I know that's all wired up right, the car's just not starting. Does anyone have any ideas?
The last thing I could think of was that the TDC sensor wires were crossed, since they are always so faded, so I tried switching those around, but with no success. I double checked the timing belt, so I know it's in timing. I checked all of my wiring connections, so I know that they're ok, and I double checked my distributor sequence, firing order, etc. I also checked my grounds. Is there some stupid thing that I'm missing? I am getting no codes off the ECU also. If anyone has any ideas, I could sure use 'em.
Thanks in advance!
The last thing I could think of was that the TDC sensor wires were crossed, since they are always so faded, so I tried switching those around, but with no success. I double checked the timing belt, so I know it's in timing. I checked all of my wiring connections, so I know that they're ok, and I double checked my distributor sequence, firing order, etc. I also checked my grounds. Is there some stupid thing that I'm missing? I am getting no codes off the ECU also. If anyone has any ideas, I could sure use 'em.
Thanks in advance!