Hello,
I just swaped in a B16A engine into my 99 Civic and when i was about to hook up the ecu i ran into a problem, the wire harness from the engine has 3 connectors but there is another one left over from the D16 that was in there before.
The forth connector is (the extra one) has the following wires:
My question is.. is there an adapter i can buy or a guide on that wire to cut and splice in?
If there's any information I left out that you may need to help let me know!
Thanks
I just swaped in a B16A engine into my 99 Civic and when i was about to hook up the ecu i ran into a problem, the wire harness from the engine has 3 connectors but there is another one left over from the D16 that was in there before.
The forth connector is (the extra one) has the following wires:
My question is.. is there an adapter i can buy or a guide on that wire to cut and splice in?
If there's any information I left out that you may need to help let me know!
Thanks