HEAD DYNAMICS
New Member
Hi guys, Im new to the forums but not to Honda's. Over the weekend I swapped a b18c into my EG hatch and am having some problems. It was an auto and I conveted it to manual and got all those wires hooked up correctly so it will start. My problems are that my speedo doesn't work and I am throwing a O2 sensor code. I took the O2 sensor out of my EG and welded a bung it into the exhaust because it was in the front on the EG. I used the b18 harness and it starts and runs fine, it just throws the O2 code and the speedo won't work. I am using a P28 ecu. I am wondering if the gauge cluster that is in my EG only works for the auto trans??? or if it is another issue. Also on my O2 sensor the same thing, the plugs were the same but I don't know if the ecu reads the sensor different then what the d15 would. I hooked up all my wires except for the purge wires for the convertion and I doubt that would cause any problems. It doesn't seem to have Vtec either, At least it doesn't feel like it and I can't hear a tone change in the exhaust. With the check engine light on, does the ecu go into a close loop mode and turn that function off???
Any help you guys could give me would be greatly apperciated. Chris
Any help you guys could give me would be greatly apperciated. Chris