civicjason
New Member
I found this link but of course no solution. I think it may be similar enough to my TCM (obd1 I think) and it's pretty close to the problems I'm having.
Here's a snippet from the link:
Fix: I sent the harness back to rywire while the bad automatic was being swapped and this code went away so I dont' know which fixed the problem but I suspect something rywire did but I have no proof just the thought that a loose wire is more likely to throw such a code rather than a slipping transmission.
Automatic transmission..Tested the wire harness for continuity..ECU - JustAnswer
Here's a snippet from the link:
I'm getting a D4 blinking light for code "14", which is a "short in FAS wire".
Code 14: Symptom: Transmission jerks hard when shifting. Possible cause, short or open in Brn/Wht wire between D16 wire and ECM, or Faulty ECM.
Fix: I sent the harness back to rywire while the bad automatic was being swapped and this code went away so I dont' know which fixed the problem but I suspect something rywire did but I have no proof just the thought that a loose wire is more likely to throw such a code rather than a slipping transmission.
What's weird is the brown/white is what I jumper to check codes right?
Automatic transmission..Tested the wire harness for continuity..ECU - JustAnswer
Last edited: