burninriceinva
New Member
I have a 91 CRX DX with B16a, Y1 /LSD. Everything with the swap went great until i took it out of the first drive around the block. i have a serious vibration over 20 mph when the car decelerates, making a right hand turn or pretty much any time weight is transfered onto the front driver side wheel and worsens when there is a passenger in the car. Vibration does go away during acceleration or when making a left hand turn. the bearings, tie rods, ball joints, tires, rims, brakes, alignment are all good. Nothing in the suspension appears to be hitting or binding. The only part that i could think to cause this would be a bad axle. I have the sir half shaft so i made custom axles out of 89 teg axles and the inner joints than came with my motor (i got this info from HAsport). Axles fit perfectly and do not seem to bind although i did notice a slight amount of slop in the inner joint on the drivers side. If anyone has tips, tricks, or info on this problem please help i need my speed fix I'm twitching from withdraws here.