boost_fed_ef
Member
so im a complete NOOB in these forums... used to have an 01 lude with roughly 7k under the hood alone daily driven ran low 12s before it met a curb at 120 so i got an IS300 that most of my time and dedication goes into but i recently bought a 90 si and have been doing nothing but research for the past 3 weeks on this site along as others as to what exactly would be the best setup for boost so ill list my specs and then what i plan on doing see what i can get here:
90 si hatch
SOHC non-vtec zc block
full suspension setup name it its on there handles like a go-cart
ngk iridium plugs 1 step colder with ngk wires
dc headers
aem short ram intake
b&m fpr
clutch masters stage 1 clutch
70 shot NOS dry shot (just taken out today)
totally clueless as to what ecu im running
with that, i got a guy down in socal that is setting up a complete turbo kit for me... the kits consists of:
t25 (stock wrx turbo)
custom made log style manifold
30" fmic
all custom IC piping
blitz hks BOV
all lines and earls fittings
1200 installed (good friend price, basically only paying for parts)
ive seen the guys work his custom work is just awesome, i trust the setup...
my concerns are... what will i need to safely run this kit ?
what ive read is, injectors, intank or inline fuel pump, and ecu. but my problem is i have no idea what kinda injectors fuel pump or where and how to get my ecu programmed? i read about uberdata, yet nothing on where and how to get it, people say its free but doesnt make sense to me... are there any injectors off a different block that will work with my setup? anyone out there with a similar set-up that can give me a rough estimate on what kinda psi this block can handle? maybe what kinda power were talkin about here? just basically any recomandations or help will be great
dont mean to be a noob but as much as ive read into the forums and researched the archives i couldnt really get the direct answers i needed or even ideas of where to get half the things i might need. hope im not being a burden but any hlep will be appreciated
90 si hatch
SOHC non-vtec zc block
full suspension setup name it its on there handles like a go-cart
ngk iridium plugs 1 step colder with ngk wires
dc headers
aem short ram intake
b&m fpr
clutch masters stage 1 clutch
70 shot NOS dry shot (just taken out today)
totally clueless as to what ecu im running
with that, i got a guy down in socal that is setting up a complete turbo kit for me... the kits consists of:
t25 (stock wrx turbo)
custom made log style manifold
30" fmic
all custom IC piping
blitz hks BOV
all lines and earls fittings
1200 installed (good friend price, basically only paying for parts)
ive seen the guys work his custom work is just awesome, i trust the setup...
my concerns are... what will i need to safely run this kit ?
what ive read is, injectors, intank or inline fuel pump, and ecu. but my problem is i have no idea what kinda injectors fuel pump or where and how to get my ecu programmed? i read about uberdata, yet nothing on where and how to get it, people say its free but doesnt make sense to me... are there any injectors off a different block that will work with my setup? anyone out there with a similar set-up that can give me a rough estimate on what kinda psi this block can handle? maybe what kinda power were talkin about here? just basically any recomandations or help will be great
dont mean to be a noob but as much as ive read into the forums and researched the archives i couldnt really get the direct answers i needed or even ideas of where to get half the things i might need. hope im not being a burden but any hlep will be appreciated