Yes you can. Anything can be done, whether it can be done easily though, that's another matter.
Now I'm not all that up on my USDM crx's but iirc you guys all got hf or si spec cars? The teg brakes won't bolt straight onto the si hubs. You'll need to get a set of crx vtec/sir hubs or civic vti from the same years. Then they'll just bolt straight on.
I have a set of ctr brakes on mine. it took a bit of fiddling but was relatively easy. Those 300mm brakes stop the car in jig-time . And they fit under my Oz superleggeras.
hey man i got a 89 rex. if you want "new" breaks. goto a junk yard, hit up a 90 -93 teg. its shit will bolt in. I reccomend all wheel disc. you can even get some stuff from a 92 or 93. anything higher up wont bolt in. if you do the rear conversion. make sure to get all the lines break and e break included.
Use 90-91 civic ex 4dr front brake assem. with the hub and all. if you put a 90 and up integra front hub setup on you 4th gen civic then your caster will be positive and your wheels will hit your fenders.. i tried that dumb ass shit and fucked my car up. ex fronts are the same diameter brakes as integra brakes but they are designed for the ef/ed chassis
be good
-DirtyRice-
!!!Got to my website and get my newest album free!!!
Originally posted by drpenguin@Aug 17 2005, 04:35 PM Yeah well my car speaks for itself. atleast in a crx you can put up to 93 teg front susp on with no porblems.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.