I'm putting a B18C5 into my del Sol Si (D16) and it seems as though my mechanic has taken care of everything, but I just want to make sure. I have the motor with LSD trans. He is getting my shift linkage, axles, and mounts from a B16 Sol. He has a guy that can rechip my stock ECU, and says we're going to leave it ODB1 with 1 O2 sensor. The TPS on the motor is broken, but I was told that the TPS from my D16 motor will mount up fine.
As long as everything I'm going to need is with me when I drive out there he will have it done in one day if everything goes smoothly, two days at worst. I'm sure people have run into nightmares before and I know you can't always have everything covered. But if there's anything you might be able to think of or things that you might have left out in the past on a big project like this, I would appreciate the info. Because I can't afford to take too much time off of work.
My email is bigdsol@wideopenwest.com if you think of anything or have suggestions.
Thanks, DSmiley
As long as everything I'm going to need is with me when I drive out there he will have it done in one day if everything goes smoothly, two days at worst. I'm sure people have run into nightmares before and I know you can't always have everything covered. But if there's anything you might be able to think of or things that you might have left out in the past on a big project like this, I would appreciate the info. Because I can't afford to take too much time off of work.
My email is bigdsol@wideopenwest.com if you think of anything or have suggestions.
Thanks, DSmiley