i was wondering what i need to swap a 99 d series motor into a 93 honda civic del sol....what will go straight in and what i would need to adjust...
thank you
email me
gusanoesco@hotmail.com
thank you
email me
gusanoesco@hotmail.com
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by formby@Sep 20 2005, 09:23 AM
think about it...use the new long block and reuse the harness.....take pics and remember where everything goes.....ohh this site is full of great info...good luck
[post=557117]Quoted post[/post]
Originally posted by PhyRe@Sep 21 2005, 12:05 PM
get the whole motor with wiring harness plug it in to your shock tower harness plug your ecu into your car wire harness fill with gas start and drive
[post=557692]Quoted post[/post]
Originally posted by pissedoffsol+Sep 22 2005, 09:35 AM-->PhyRe@Sep 21 2005, 12:05 PM
get the whole motor with wiring harness plug it in to your shock tower harness plug your ecu into your car wire harness fill with gas start and drive
[post=557692]Quoted post[/post]
that won't work.. lol
swap it in.
use your current driverside and rear mount
if both old and new motors are vtec, or both are non-vtec, you're golden. if you're converting, you'll need to do some other stuff, but you don't specifiy what you are doing.
swap the dizzy, injectors, alternator from old motor to new motor.
alternative is to cut the plug from the new motor and paste onto old harness.
again, this only works if you're keeping the same vtec/non-vtec motor.
[post=558332]Quoted post[/post]
Originally posted by Gusano@Sep 23 2005, 11:46 AM
ok im planning on putting in a d16y7 civic motor into a honda civic del sol 93...and i was wondering if i needed the following parts from the d16....ecu?...axles?..etc....
or would all my stock parts from the del sol would work for it....so it would be a easy plug n play swap...or woudl i need modifications
[post=559213]Quoted post[/post]