Will this swap work> I have a complete d16z6 engine and I want to know if i can swap the head onto my d15b2. I am going to get my engine compression check to see if i have blown piston rings or if it is the valve seals on the exhaust side.
I did a little bit of math and the CR looks like it should be around 10.2:1
.. just to be clear I am going to use everything off the d15b and just swap it on to the z6 head?
Originally posted by erikespo@Apr 22 2005, 06:33 AM I did a little bit of math and the CR looks like it should be around 10.2:1
.. just to be clear I am going to use everything off the d15b and just swap it on to the z6 head?
Just so you know you'll get a very substantial gain by swapping the IM for the z6 in, and are you currently DPFI or MPFI? Because that might require a swap, I recommend www.D-series.org for a lot more info on this swap...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.