D15b2 with d16z6 head?

[erikespo]

Will this swap work> I have a complete d16z6 engine and I want to know if i can swap the head onto my d15b2. I am going to get my engine compression check to see if i have blown piston rings or if it is the valve seals on the exhaust side.

 

[old Skuul Hatch]

should

 

[erikespo]

I did a little bit of math and the CR looks like it should be around 10.2:1
.. just to be clear I am going to use everything off the d15b and just swap it on to the z6 head?

 

[ricerking13]

Originally posted by erikespo@Apr 22 2005, 06:33 AM
I did a little bit of math and the CR looks like it should be around 10.2:1
.. just to be clear I am going to use everything off the d15b and just swap it on to the z6 head?

[post=489983]Quoted post[/post]​

Just so you know you'll get a very substantial gain by swapping the IM for the z6 in, and are you currently DPFI or MPFI? Because that might require a swap, I recommend www.D-series.org for a lot more info on this swap...

 

[erikespo]

really you gain power? I didn't know that.. I just wanted to do it just because..

No crap you gain power.. That is the whole point of doing it. Thank you mr obvious