eicivic
Senior Member
Has anyone even had a hard time putting the nuts on ARP studs? Well i know i have and i thought of a easy, way to make it a lot easier. I have dropped the nuts in there on their sides many of times and took me forever to get them back out cause there is such little room.
What to use:
Good pencil magnet!
Align the nut to the magnet "centered" with the top of the nut as in the picture.
Then apply your moly lube
Then install.. Just use the magnet to start the nut on the stud and you should be able get it snug.
What to use:
Good pencil magnet!
Align the nut to the magnet "centered" with the top of the nut as in the picture.
Then apply your moly lube
Then install.. Just use the magnet to start the nut on the stud and you should be able get it snug.