Justins99gsx
DSMer
Hey everyone I just signed up on here to see if I could get a little clarification on a couple things... I have been a DSMer for nearly five years and built a couple bad ass engines so I am not a noob when it comes to engines and stuff... Now this prelude has the 2.3L H23a motor in it and after doing some research on here (great site by the way) I notice that there is a better motor to put in it, the H22a with VTEC... Now from what I have been reading all I need for the swap is a H22a Longblock and the ecu..... So does that mean:
1. The Tranny from the H23 will bolt up to the H22a?
2. I use the H23 Wiring harness and have to do some wiring for VTEC?
3. Do I still use the H23 accesories (power steering, ac, etc.)?
4. Is there anything else missing that I would possibly need for the swap?
5. I read something about a problem with this swap but can't find exactly what it is....
Sorry if I posted this in the wrong section feel free to move it if needed....Thanks in advance....
Justin
1. The Tranny from the H23 will bolt up to the H22a?
2. I use the H23 Wiring harness and have to do some wiring for VTEC?
3. Do I still use the H23 accesories (power steering, ac, etc.)?
4. Is there anything else missing that I would possibly need for the swap?
5. I read something about a problem with this swap but can't find exactly what it is....
Sorry if I posted this in the wrong section feel free to move it if needed....Thanks in advance....
Justin
Last edited: