D delslow-as-shyt Junior Member Sep 14, 2003 #1 if an 1.8L engine is bored over .60, does it mean that the literage is now 2.4?
J JDMilan Senior Member Sep 14, 2003 #2 nope.... stock bore on a 1.8 B series is 81mm now if you go to 84mm it will roughly be a 2.0 got it...
nope.... stock bore on a 1.8 B series is 81mm now if you go to 84mm it will roughly be a 2.0 got it...
D delslow-as-shyt Junior Member Sep 14, 2003 #5 Thanks bro, so if it was bored over 1.60 it would be 1.96L?
O OZRacing Member Sep 14, 2003 #6 How much of a cylinder wall you want to leave there... none??? Unless you have a fully sleeved block...
How much of a cylinder wall you want to leave there... none??? Unless you have a fully sleeved block...
P posol RETIRED Sep 14, 2003 #7 not true. "60 over" is american talk. it sands for .060 of a inch. you need to convert that to milimeters liek the rest of us use here in honda world 0.060 inch [in] equivalent to: 1.52400 millimetre [mm] so, you are 81.00 stock you are now 82.5mm... a size i have NEVER heard of being used on hondas. usually, its 81 81.5 83 84 84.5 85 86
not true. "60 over" is american talk. it sands for .060 of a inch. you need to convert that to milimeters liek the rest of us use here in honda world 0.060 inch [in] equivalent to: 1.52400 millimetre [mm] so, you are 81.00 stock you are now 82.5mm... a size i have NEVER heard of being used on hondas. usually, its 81 81.5 83 84 84.5 85 86
J JDMilan Senior Member Sep 15, 2003 #8 isn't it recommend not to just overbore that much on our blocks... sorry for the mix up