JdmB18C667
New Member
Bottom End Info:
00 Si B16A2
81.5MM
8.5:1 Ross Racing Pistons and Rings
Eagle H beam rods w/ big ARP rod bolts
Golden Eagle block guard
ARP Head studs
Stock Si oil pump
Stock Si oil Pan with A/N fitting for return line
Water pump and timing belt have 10k miles on them
Main and rod bearings have about 10k miles on them
Motor was machined and rebuilt about 10k miles ago, but had to have new piston rings installed about 7k miles later.
Head Info:
Head b16 head Brian Crower stage 2 boost cams
DPR Pure Tuning Springs and Retainers
New valvstem seals and head has gone through a machine shop less then 5k on head.
Cams and valvetrain never installed.
Skunk 2 intake mani New
Turbosetup:
Greddy big FMIC Less then 5k
All Piping included powder coated Blue
Real HKS BOV
Garret 50 Trim turbo
Ram Horn Manifold In great shape
Tial 38mm Wastegate
Will Come with 2.5 to 3in Downpipe
Fuel System Info:
RC 1000cc Injectors
Aem Fuel Rail
Walboro 255 Fuel Pump
Transmission and Drivetrain Info:
Stock B16 Trans shift great no grinds or anything
ACT 6 Puck Unsprung Clutch Less then 7k
Stock Flywheel
Stock SI Halfshafts
Solid Tourqe Mounts
B&M Shifter With Linkage
Hondata S200 Included with ECU
Will come with Axels, Harness everything for a complete swap..
This is a complete swap Built Turbo Set up. The motor made 330Hp at 20Lbs with my old hurt turbo and only reving to 7200Rpm.. Was still making power but do to a wiring issue (wich is now Fixed) it would not rev past that point. I daily drive on this setup and it has treated me well.
Asking 4500 OBO.
$4500 obo
can be shipped for the right rice
00 Si B16A2
81.5MM
8.5:1 Ross Racing Pistons and Rings
Eagle H beam rods w/ big ARP rod bolts
Golden Eagle block guard
ARP Head studs
Stock Si oil pump
Stock Si oil Pan with A/N fitting for return line
Water pump and timing belt have 10k miles on them
Main and rod bearings have about 10k miles on them
Motor was machined and rebuilt about 10k miles ago, but had to have new piston rings installed about 7k miles later.
Head Info:
Head b16 head Brian Crower stage 2 boost cams
DPR Pure Tuning Springs and Retainers
New valvstem seals and head has gone through a machine shop less then 5k on head.
Cams and valvetrain never installed.
Skunk 2 intake mani New
Turbosetup:
Greddy big FMIC Less then 5k
All Piping included powder coated Blue
Real HKS BOV
Garret 50 Trim turbo
Ram Horn Manifold In great shape
Tial 38mm Wastegate
Will Come with 2.5 to 3in Downpipe
Fuel System Info:
RC 1000cc Injectors
Aem Fuel Rail
Walboro 255 Fuel Pump
Transmission and Drivetrain Info:
Stock B16 Trans shift great no grinds or anything
ACT 6 Puck Unsprung Clutch Less then 7k
Stock Flywheel
Stock SI Halfshafts
Solid Tourqe Mounts
B&M Shifter With Linkage
Hondata S200 Included with ECU
Will come with Axels, Harness everything for a complete swap..
This is a complete swap Built Turbo Set up. The motor made 330Hp at 20Lbs with my old hurt turbo and only reving to 7200Rpm.. Was still making power but do to a wiring issue (wich is now Fixed) it would not rev past that point. I daily drive on this setup and it has treated me well.
Asking 4500 OBO.
$4500 obo
can be shipped for the right rice