I will take trades on these for Bseries T3 Turbo parts such as a manifold, tial 38mm wastegate, 5 bolt downpipe, msd igntion, etc....or aftermarket parts for a B20 or 88 CRX, let me know what ya got!
I'm looking to sell a BRAND NEW never used set of B18a B18b B20b B20z CROWER 402T Turbo Cams. Here are the specs straight from CROWER although i know you guys already know about these cams. These are in my opinion one of the BEST aftermarket Turbo/Nitrous cams and respond well to them. These are good because you can get the same amount of horsepower with them at a lower boost level which is better for your motor! Would you rather run that B18/B20 at 8 psi or at 5-6 psi and still make the same amount of power with these cams as at the higher boost level?
"62402T-2 Stage 2 - Turbo/Super Charger
Specially designed specifically for forced induction applications.
Features short duration, high lift for added cylinder pressure and good bottom end power. Requires kit #84162 -From Crower.com
It requires the 84162 kit from crower which is their Dual Springs and Titanium Retainers set. I am also selling this kit.
Both the cams and spring kit were never used only installed into a separate head that was ported/polished from Import Builders and never installed on a motor and therefore never ran. 0 miles!!! The cams have since been removed from the head and stored.
Crower (which is where they were directly bought from) offers these for the price of $422.07 for the set of brand new cams.
I am looking for $350 OBO
As for the Springs/retainers kit they were also bought directly from Crower and they go for $356.61. I will let these go for $300 or best offer.
If you buy both the cams and springs/retainers, I will let them go for $600. which is a savings of over $175! All prices include shipping.
UPDATE!!! I will let the cams and springs/retainers go for $550 together! This beats any ebay deals.
I am paypal verified and have vouches on Honda-tech.
Pictures are available upon request.
any questions, email me at jkbboy85@hotmail.com or hit me up on aim at jkbboy85
here is a link to the honda-tech thread:
http://www.honda-tech.com/zerothread?id=1225913
thank you
I'm looking to sell a BRAND NEW never used set of B18a B18b B20b B20z CROWER 402T Turbo Cams. Here are the specs straight from CROWER although i know you guys already know about these cams. These are in my opinion one of the BEST aftermarket Turbo/Nitrous cams and respond well to them. These are good because you can get the same amount of horsepower with them at a lower boost level which is better for your motor! Would you rather run that B18/B20 at 8 psi or at 5-6 psi and still make the same amount of power with these cams as at the higher boost level?
"62402T-2 Stage 2 - Turbo/Super Charger
Specially designed specifically for forced induction applications.
Features short duration, high lift for added cylinder pressure and good bottom end power. Requires kit #84162 -From Crower.com
It requires the 84162 kit from crower which is their Dual Springs and Titanium Retainers set. I am also selling this kit.
Both the cams and spring kit were never used only installed into a separate head that was ported/polished from Import Builders and never installed on a motor and therefore never ran. 0 miles!!! The cams have since been removed from the head and stored.
Crower (which is where they were directly bought from) offers these for the price of $422.07 for the set of brand new cams.
I am looking for $350 OBO
As for the Springs/retainers kit they were also bought directly from Crower and they go for $356.61. I will let these go for $300 or best offer.
If you buy both the cams and springs/retainers, I will let them go for $600. which is a savings of over $175! All prices include shipping.
UPDATE!!! I will let the cams and springs/retainers go for $550 together! This beats any ebay deals.
I am paypal verified and have vouches on Honda-tech.
Pictures are available upon request.
any questions, email me at jkbboy85@hotmail.com or hit me up on aim at jkbboy85
here is a link to the honda-tech thread:
http://www.honda-tech.com/zerothread?id=1225913
thank you