hello everyone.. im new in posting but not to the forums... and i have fairly adequate about hondas and compatibility and obd etc...
for reference, i drive a 94 civic ex.... and by luck, i purchased a 90 4 door integra from a longtime friend for 500 bucks... inside is a b17...
i know that the motor bolts in and whatnot, and that the cable trans is no good to me, so i'll just get me a hydro one later...
i also know that the motor is obd1 from the factory, but i'm looking at the harness and I see obd0 injectors because the plugs by the driver shock tower has a factory resistor box..
would i be able to just use my old civic ex engine harness for the engine..?? or would i have to find an integra obd1 harness..??
anymore info on the b17 would be good too if any of you have some!!! thanks!!!
for reference, i drive a 94 civic ex.... and by luck, i purchased a 90 4 door integra from a longtime friend for 500 bucks... inside is a b17...
i know that the motor bolts in and whatnot, and that the cable trans is no good to me, so i'll just get me a hydro one later...
i also know that the motor is obd1 from the factory, but i'm looking at the harness and I see obd0 injectors because the plugs by the driver shock tower has a factory resistor box..
would i be able to just use my old civic ex engine harness for the engine..?? or would i have to find an integra obd1 harness..??
anymore info on the b17 would be good too if any of you have some!!! thanks!!!