=====IAB and Other sensors====

[hatchboy]

Allrite guys what up, here the situation. I have a 99 ex that used to be auto and now in manual.
I purchased a JDM obd1 gsr swap.
I am using the obd2 harness on the obd1 motor with obd2-1 conversion harness going to obd1 jdm p72.
**How do i wire up the IAB's? most info iv found is for EG's etc.?

**IAT
I know that i will have to convert from the 3 pin plug to the 2 pin plug. I sthat correct?

** Do i have to do anything with the CFK or just leave it unplugged??

**IAC Valve
Well sense it used to be automatic it has the 3 pin plug, so im going to put on a 2 pin plug. Correct??

***FIT Valve (Fast idle Thermo)
Do i have to connect this?
EDIT:I read that that is only on auto's, so i should need it.

***IAB (secondary butterfly's)
How do i wire them up,keep in mind obd1 motor,obd2 harness, obd2 to 1 conversion harness into obd1 ecu
I heard somewhere you can unhook the evap or something and use that plug? or i could just put in an extra plug i have and just wire it to the harness correct? what wires?

I think thats all the questions i have for now, Thanks for all your help guys, appreciate it.

-Dan

 

[hatchboy]

bump

 

[hatchboy]

Come on guys, i preferr this site 50x's over honda-tech. I came here so i didn't have to deal with assholes, help me out.

 

[hatchboy]

quick thurs night bump