Right now Im running a T3/T4 Hybrid.. As for power goal I don't really have a specific hp goal. Id like enough power to run low 12s or break into the 11's. Roughly how much power would that take?
Im in the process of gather info on a new motor I am going to build. Its going to be a b18 block with a LS crank, Eagle H beams.. Not sure which pistons yet. I got a Built ITR head Im going to use also.
Careful with that "built" ITR head. If it has all motor cams in it you will have some overlap. This is undesirable in any forced induction application.
Careful with that "built" ITR head. If it has all motor cams in it you will have some overlap. This is undesirable in any forced induction application.
Any cam that has a high duration and a lot of valve over-lap. Turbo cam profiles usually have higher lift and a shorter duration for less over-lap. Valve over-lap means that you're blowing boost out of the exhaust ports.
gsr cams are considered the best oem honda cam for boost. I've seen reports of people gaining 20whp just by tuning the cam angle of gsr cams on the dyno.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.