1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Internal setup.

Discussion in 'Engine Building' started by korey, Jan 20, 2004.

  1. korey

    korey Senior Member

    Messages:
    171
    Likes Received:
    0
    Joined:
    Sep 5, 2003
    Location:
    OREGON
    I am new to builing motors so if this sounds dumb, im sorry. i have a 96 ls motor and plan on pnp the head. My internals are gonna be Skunk2 valves train, crower 402 cams( I think), crower rods, and not sure about the type of pistons. I want 11:1 comp ratio with this. If anyone could critique this setup for me, tell me the highs and lows, I would appreciate it, thanx.
     
  2. allgo

    allgo Senior Member

    Messages:
    195
    Likes Received:
    0
    Joined:
    Sep 13, 2003
    run b16 pistons and it will be about 11-1 or maybe more
     
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    yup. b16 pistons are a good cheap bump im compression.

    wildbill had jdm b16 pistons (a hair more compression than usdm) crower 403 cams and put 150 whp out of his Ls on a stock header, crap intake, hacked to hell exhaust, and a leaky pcv valve. :)
     
  4. JDMilan

    JDMilan Senior Member

    Messages:
    6,730
    Likes Received:
    0
    Joined:
    May 11, 2003
    Location:
    Boca Raton, FL
  5. Kolumbo69

    Kolumbo69 Senior Member

    Messages:
    165
    Likes Received:
    0
    Joined:
    Apr 17, 2003
    Location:
    Calgary canada
    got with ctr pistons and a b16 vtec head it will get you in the 12's if you run a search on HS the setup is explained well and its cheap thats what i plan on doing if i ever find a block to work on.....
     
Verification:
Draft saved Draft deleted

Share This Page