I have a b17 and was thinking about putting a integra R crank in to stroke it, but was curious if i still use the b17 rods or what rods should i use? thanks
Swapping the rods in will probally push the pistons into the head, that or you might have a very high compression ratio. Just swapping the pistons will work fine and bump compression up(probally around 10.7:1, which is very good and still very streetable).
Originally posted by K2e2vin@Aug 17 2005, 01:16 AM Swapping the rods in will probally push the pistons into the head, that or you might have a very high compression ratio. Just swapping the pistons will work fine and bump compression up(probally around 10.7:1, which is very good and still very streetable).
I think im just going to get the head milled down .20 the block was just rebuilt i guess so im not gonna mess with it anymore. thanks for all the input.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.