We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by project_accord@Mar 28 2004, 07:24 PM
You have to run the 4 wires that used to run down to the ckp,tdc sensors that where on the crank, up to the distributor and add those to the distributor wirng. there will be the same number of wires once you run those up to the distibutor but the colors wont match. i did this swap awhile ago in my accord but i have since switched over to obd2 so i have nothing to reference.
Originally posted by aznprid3@Mar 30 2004, 10:19 PM
im having the same problem but its a 93 jdm h22 on a 97 accord. i just double checked the wiring to the distributor and the ckp sensor and everything is right. so do i have to hook up the coil too? i bought a distributor cap from honda and it was an external coil....so could this be why the car isnt starting?
Originally posted by imprt92+Apr 15 2004, 06:37 PM-->imprt92@Apr 15 2004, 06:37 PMhey tab do you know what wire is the pos inside the dist? thanks
hey tab do you know what wire is the pos inside the dist? thanks