Thread kinda back from the dead but here is my update.
I ended up not getting it. Here is the reason.
Because the guy said "rebagged JUN fw" I did not get it. A lot of the JDM flywheels, JUN in particular, are made for JDM starters which have a slightly diffrent tooth pattern. The problem with this is after a while, the starter (which is harder) eats away at the teeth on the FW. Then to top it off, since it is chromoly, the teeth are more likely to get damaged by the meshing of the FW and the starter because the starter teeth are harder. A guy on Team-integra had a JUN flywheel and after about a year, his flywheel teeth got so bad that he had to push start the car to get it running. On honda-tech, I found one bad review about this flywheel, suffering from the same issue, so I steared away from it.
So what did I get?
ACT streetlite FW (12 lbs) and I mixed it with a Exedy Organic disc and Pressure plate. So how does it feel? Well my car is up on jackstands right now, Swap is almost totally finished and the pedal presure is great. Not as stiff as the ACT pressure plate (which I hate being so stiff) but much more pressure as stock. I think that it is just right.