Id probably get a brian crower LW crank with lighter weight rods, resleeve and bore out to 85mm. 6.5cc dome pistons with a 30mm compression height.
then id get some head work done, some killer cams (like skunk2 pro2s or something).
I'd also try to find a higher ratio final drive and get myself a ton of time on the dyno.
The above is JUST the engine build and it'll probably run about 6k.
The above was just written off the top of my head without a ton of research done.
then id get some head work done, some killer cams (like skunk2 pro2s or something).
I'd also try to find a higher ratio final drive and get myself a ton of time on the dyno.
The above is JUST the engine build and it'll probably run about 6k.
The above was just written off the top of my head without a ton of research done.