Black Widow g2
*princess*
if a 2.5 bar will work, why get a 3 bar? you plan on boosting over 22psi? Taken from from Xenocron.com:
Motorola 2.5 Bar
MAP Sensor Kit
Supports boost upto ~21.75 psi
$35.00
The kit includes one Motorola 2.5 Bar Map sensor,detachable connector and 12" of colored wire with online instructions to hook it into your stock MAP wiring. Upgrading from a stock Honda/Acura Map sensor that can only read ~10 psi of boost will allow you to run up to ~21.75 psi of boost as well set a boost cut in your engine management. This safety feature has saved many motors from overboosting due to many random factors/problems that occur on Turbo Charged vehicles. This sensor is extremely linear which makes for ease of tuning using the most common Honda/Acura ECU Editors available. (Crome, Neptune, Hondata, Uberdata, TurboEdit & BRE)
Motorola 2.5 Bar
MAP Sensor Kit
Supports boost upto ~21.75 psi
$35.00
The kit includes one Motorola 2.5 Bar Map sensor,detachable connector and 12" of colored wire with online instructions to hook it into your stock MAP wiring. Upgrading from a stock Honda/Acura Map sensor that can only read ~10 psi of boost will allow you to run up to ~21.75 psi of boost as well set a boost cut in your engine management. This safety feature has saved many motors from overboosting due to many random factors/problems that occur on Turbo Charged vehicles. This sensor is extremely linear which makes for ease of tuning using the most common Honda/Acura ECU Editors available. (Crome, Neptune, Hondata, Uberdata, TurboEdit & BRE)