FunForFree33
New Member
Ok. So I swaped my z6 in my 95 civic for b18c jdm gsr. Runs bad. Codes are 8 and 16,
I tried changing the dizzy but no luck. Has a miss to it and wont rev past 3500ish.
Also when I turn the key to the on position the fuel pump comes on. Isnt it supposed to pressurize and turn off. This wont it just keeps on running..I took the line off the fpr and it is just running full all the time never pressurizes. Also The code 16 is the top dead sensor. I omed it out it is at 362 ohms which is normal. Anyone have any other ideas? Im stuck.
I tried changing the dizzy but no luck. Has a miss to it and wont rev past 3500ish.
Also when I turn the key to the on position the fuel pump comes on. Isnt it supposed to pressurize and turn off. This wont it just keeps on running..I took the line off the fpr and it is just running full all the time never pressurizes. Also The code 16 is the top dead sensor. I omed it out it is at 362 ohms which is normal. Anyone have any other ideas? Im stuck.