NyQuiL_AcCoRD
Member
What's up everyone?
I just finished swapping a H22A into my 1995 Accord. The car runs perfectly fine, the car idles fine. The car runs like a champ, but theres a problem.
Problems:
1. When I decide to push it, rather Redlining at 7200 rpm, it only redlines at 6800 rpm.
2. Also, my v-tec doesn't engage. When Im climbing the rpm's, and when I get to 5500 ( v-tec engagement ), I don't feel the pull, or hear the v-tec.
My friend has the same swap, but his car redlines at 7200 rpm, and his v-tec engages at 5500.
I check the ECU, but it wasn't the ECU. I tried my buddy's ECU, and same results. No v-tec engagement, and Im still redline at 6800 rpm.
My buddy's ECU is a JUN Chipped P13 ECU. The ECU has a 9400 rpm rev limit. So, it can't be the ECU's.
3. Also, everytime I pull up my E-brake, my ABS light comes on.
Well, those are my problems with my swap, I don't know what to do. Could it be from the poor wiring, bad wires from the disturbtor, or my v-tec solenoid?
If threes anyone, who had the same problem, please help, or if anyone know what could be wrong. I appeciate the help. Thanks.
I just finished swapping a H22A into my 1995 Accord. The car runs perfectly fine, the car idles fine. The car runs like a champ, but theres a problem.
Problems:
1. When I decide to push it, rather Redlining at 7200 rpm, it only redlines at 6800 rpm.
2. Also, my v-tec doesn't engage. When Im climbing the rpm's, and when I get to 5500 ( v-tec engagement ), I don't feel the pull, or hear the v-tec.
My friend has the same swap, but his car redlines at 7200 rpm, and his v-tec engages at 5500.
I check the ECU, but it wasn't the ECU. I tried my buddy's ECU, and same results. No v-tec engagement, and Im still redline at 6800 rpm.
My buddy's ECU is a JUN Chipped P13 ECU. The ECU has a 9400 rpm rev limit. So, it can't be the ECU's.
3. Also, everytime I pull up my E-brake, my ABS light comes on.
Well, those are my problems with my swap, I don't know what to do. Could it be from the poor wiring, bad wires from the disturbtor, or my v-tec solenoid?
If threes anyone, who had the same problem, please help, or if anyone know what could be wrong. I appeciate the help. Thanks.