Rfrazier2012
New Member
Is it possible to use a TODA VTEC Killer Cam on a SOHC d16a6? I have a 89 CRX and am wanting to put one in it. If not, any ideas on what motor to swap? I was thinkin a b16
We may earn a small commission from affiliate links and paid advertisements. Terms
I think I'm gonna stick with the d16 but what aggressive cams are there that will give it that VTEC killer tone. And what exhausts can I get to make it have a deep sound, not that pissed off weedeater sound. Lol
I think I'm gonna stick with the d16 but what aggressive cams are there that will give it that VTEC killer tone. And what exhausts can I get to make it have a deep sound, not that pissed off weedeater sound. Lol
Ok. If I was to fully build the d16a6 and boost it how much horsepower could I get?. I'm thinking of putting the z6 head on it
You're never going to get the same tone as you would from a dual cam vtec set up. DOHC VTEC engine have Vtec lobes on both the intake and exhaust cams. With a SOHC, it's on the intake side only. Expect to be able to hear it but it's not gonna "pop" like a DOHC engine does.
Still doesn't sound as niceBut with monster lobes on a custom cam, you can get that "tone" on any SOHC engine.
Still doesn't sound as nice