Just going to put this article here for right now.
We've all heard about the warped brake rotors and brake pedal pulsation.
This article lays out some things that might cause premature brake failure.
I found it while doing some research on the subject and this seems to really make sense to me.
http://www.hendonpub.com/resources/article_archive/results/details?id=1787
Opinions?
I don't typically torque my wheels on re-installation, but i also have a Tacoma that seems to need new rotors every 9-12 months. Going to give this a try and see what happens.
Assuming discount tire.com torque information is accurate honda and toyots only call for 80 ft lbs of torque on wheels studs. somethings tells me my breaker bar is way too much leverage for this application.
We've all heard about the warped brake rotors and brake pedal pulsation.
This article lays out some things that might cause premature brake failure.
I found it while doing some research on the subject and this seems to really make sense to me.
http://www.hendonpub.com/resources/article_archive/results/details?id=1787
Opinions?
I don't typically torque my wheels on re-installation, but i also have a Tacoma that seems to need new rotors every 9-12 months. Going to give this a try and see what happens.
Assuming discount tire.com torque information is accurate honda and toyots only call for 80 ft lbs of torque on wheels studs. somethings tells me my breaker bar is way too much leverage for this application.