h22bubbleback
Senior Member
today i change my wiring harness over to an obd1 sohc vtec harness. i hooked up everything exact. however. on my b16 head i have obo-0 injectors. so i used obd 0 injector plugs on the harness. i had this setup on my previous harness as well. i cut the old plugs off and splice the obd 0 plugs on. i simply just twisted the wirings together(this worked on my previous harness). i go to start my car..it fires and cranks over slightly but sounds like injectors are firing completly out of order so i put them on every single possible combo and same or worse result ea. time. sounds horrid.....my question is..could the connection be to weak some were in my plugs because i simply just twisted the wires together? should i soder them?
changed harness
cut and spliced obo-0 plugs onto obd1 harness
now car wont start
changed harness
cut and spliced obo-0 plugs onto obd1 harness
now car wont start