Recent content by uberdog

I believe the stickers are just to show the layout. The pannel comes uncut and it looks like that is an uncut pannel with stickers on it just to give you the idea. I have one installed and it is not too low. No, you don't look at the shifter with every shift. No, why would you want to look at...

Got two, don't need both.

Thinking of giving ACL main and rod bearings a shot but need to know what they consider a "standard" size. Anyone know the actual thickness of ACL standard bearings? Pretty hard to plunk down the bucks not knowing. I would assume they are somewhere around the middle of the pack in the OEM color...

I think he means cyl to piston wall clearance, since he said he wants to use stock pistons and rings. I believe that is .0004 to .0020. Stay closer to the small number for street with cast pistons and closer or even more than the big number if using forged, which should come with recommended...

What's the problem with the b18a. Lot's of franks are built on it, are they not. Thought all transmissions that fit b series blocks fit all b series blocks.

Sorry all. Just noticed this issue addressed recently. I tried searching before posting but search option on forums kept rejecting anything less than four characters so anything with AC or a/c in the string was not going through. From the other posts it sounds like a 97 CRV or a DelSol b16 will...

Hello - anyone able to advise me on what AC bracket I need to mount the original 95 civic compressor to the b16? Are there aftermarket mounts available. Will a b16 mount from a del sol do it or did it use a different compressor?

Settled on Garrett GT28rs turbo on ODBI B16 in a 95 civic coupe using stock internals while I build another B16 for more boost in the garage. Planning on ubberdata for tuning Want to retain A/C so what manifold is the best way to go? Internal or external wastegate? What size injectors do I...

Thanks, but how could it be the throwout bearing when the noise goes away when the throwout bearing is engaged and the clutch is depressed. This is just the opposite. No noise when clutch in and throwout bearing engaged. Noise when clutch released, in neurtral or while in gear. My tendancy is to...

Right, the noise is made when in gear with the clutch pedal up and when in neutral with the clutch pedal up.

Anyone have experience with KMS springs, titanium retainers, etc. Price is right. Maybe too right.

Did a search and couldn't find anything but wondering if anyone has experience with trans shaft bearing problems and such. B16 5 spd in neutral and in gear making a hushed grinding or draggin sound. Push in the clutch and it goes away. Rev the engive with cluth depressed and engine purs without...

Thanks guys; I'm convinced. I put Ubberdata on my computer and have been reading at the ubber web site and at pmfi.org This gsr turbo has a p72 ECU. I found instructions on chipping conversion and parts list for a p28. Does anyone know if the instructions are the same for p72? If not, anyone...

b18c is getting a t3 garret and running 8 lbs boost for mild street. No management system and hoping to deal with fuel via the pump and regulator. I have a 190 Walbro and the red, b&m command regulator. Are these two in combination going to handle the job and what do I have to worry about on...

Thanks guys Calista, just out of curiosity, why did you tear into your crv/vtec after 45,000 miles?