I'm looking for a stock d16a6 engine
if you are near St Paul MN I could pick it up otherwise it would have to be shipped.
I don't need a trans
let me know what you have and how much you want
Please e-mail me as I don't come on this forum much anymore.
sean.sonnabend[at]gmail.com...
According to edmunds
CX = 2094
VX/DX = 2179
SI = 2326
I understand why the SI weighs more (sunroof, brakes, etc.)
I don't really understand why there is almost a 100lb weight difference between the CX and the VX/DX.
the only real difference that I can think of is that the CX came with an...
Has anyone used/own one of these?
I have a obd2 car in addition to my civic and thought it would be nice to have something that could give me a lot of data for a pretty low price and I don't have to put up 15 gauge piller pods
Brockway Engineering
just looking for some feedback on what you...
what kind of markings are typically found on cams?
I picked up a used set of skunk2 stage 1 cams and really have now way of knowing weather they are the real deal or a set of gsr cams
is there a way to tell by the markings or would you have to measure the lobes
thanks
Sean
I'm about to start adjusting the valve lash after installing new cams and was wondering what the difference is in the range of the setting
for the intake it is between 15 and 19... so 17 would be the natural selection
the feeler guages I have don't have a 17 so I have to pick either 16 or 18...
I began work yesterday changing out my stock b16a cams for a set of skunk2 stage1s
I am not changing the timing belt at this time so I am attempting to just slip the belt off the old pulleys and onto the new adjustable pulleys
the problem is that when I try to line everything up the cams don't...
I have a set of Dseries axle's in my garage from my old D15 (92 vintage) and a friend of mine needs new axles on her 96 EX
I am 99% sure that the axles are the same but figured it can't hurt to run it by you guys just to make sure
thanks
I'm thinking of getting a billet cam seal and the magnetic oil and tranny drain plugs from them and was wondering if anyone is using either and how they like them?
does anyone have any good comparisons to other similar parts?
Golden Eagle makes an oil plug and a cam seal that I have heard good...
I know frame locks were all the rage when they were released for the EK's last summer/fall and I know alot of people started making there own or adapting the EK kit to fit the EG/DC's
but now that there is an actual kit out for the EG's I haven't heard anyone talking about it.... I'm just...
a co-worker of mine has a 97 coupe EX and one of the stock fogs has yellowed and she wants to remove and clean it or replace it or something but doesn't want to pay a mechanic to do it
do anyone know how this is done, or have a good DIY resource for this
thanks
I know this can be done and everything I have read says that it will increase your oil pressure slightly due to the smaller size of the K filters.
does anyone have any direct experience with this? good or bad?
just trying to make a decision before I do my next oil change
thanks
just wondering if anyone knows how much brake fluid a 5thgen civic/3g teg holds?
I was an idiot and listened to the guy at the parts department (Honda) when he said that I would only need one bottle of fluid... pretty sure I'm going to need more now as I'm not done bleeding yet and I'm out of...
I was down to the last line to replace on my brake swap and I rounded off the hardline fitting on the passenger side front
anyone know of a good way to handle this situation
I have never had to put new fittings on a brake line and flare pipe or anything like that and would rather not
I was...
so I'm trying to figure out how to wire up these side markers and wondering if anyone here knows how these sidemarkers are supposed to work
are they just supposed to be on all the time with the parking lights?
are they only supposed to come on when the turn signal is on?
or are they supposed to...
while the 1" 2g integra MC has the fitting connections in the same place at the 5g civics the problem is that the thing bolts to the booster in reverse to the way the 5g MC bolts up
has anyone ever seen someone make an adapter to correct this or is the only way to swap the booster as well...
I am looking at picking up a full GSR brake swap and am wondering if it will even work seeing as my 92 lx didn't have ABS and I'm pretty sure all GSR's did
seems like there should be no difference as far as the calipers go but wanted to ask around and find out for sure
if anyone knows I'd...
quick question....
are all 5th gen civic corner lights the same?
I have a sedan and found a set of corner lights for sale that are on a coupe
thanks
Sean
mention whether it makes a diff as to how much power you are making, personally I have a NA b16 and will be keeping it that way, but hope to get up to 180-200hp at the wheels some day
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.