gsr block p30 pistons b16 head. The p30 pistons im ordering are brand new with new rings. they are standard bore with stock rings.. They should fit rite in correct ?? gsr block has stock rods and crankshaft. any valve clearance issues with this setup. ive looked at rite ups on this but havent...
turbo is throwin oil on the exhaust side could be seals or my return what do u think of the return setup im gonna change it so itzz on a 45 alll the way 2 the pan but i think thiz iz the reason my crossmember waz in the way so i went down and under then it goes on an upward angle to the fitting...
i have no idea what the problem is i checked everywhere no leaks from piping or intercooler theres no oil coming out of the compressor side. i havent checked the exhaust side yet but when i drive it does not smoke. when i get on my car turbo builds about 2 or 3 psi of boost thatz itt i have a...
in the morning when i first start my car my oil light flashes on thats the only time it ever does it cold start oil pressure is between 70 and 75 psi when car is warm pressure drops to about 40 psi but sumtimes at idle it will drop down to 15 to 20 psi were the car sounds like it wants to die is...
runnin 5psi turbonetics t3t4 turbo not gonna be gettin on the car it iz untuned 450cc injectors bm fuel pressure regulator walboro fuel pump what should i set the fuel psi at
just bought a S1 tranny suppose to be a jdm S1 any1 kno how 2 look up what car it came out of it still has the gold sticker on it been calling dealerships no 1 can help me!!!! i kno u can count the teeth on the gears is that the only way ??
i got a good deal on a subaru legacy ihi turbo i wanna boost my b16 with it 12psi any 1 think i will be pushin the turbo to much with the high rpms of the b16 thiz iz my daily driver so i dnt beat on it just open it up every now an then feeel meee lol
i gotta question if i run my stock exhaust with 2.5 inch piping will that slow the spool up time of a t25 i have a b16a and i kno that motor might be to much for the turbo and it wont hold boost to redline but with the stock exhaust i was thinkin boost would kick in a lil lata because of the...
i got a 90 b16a obd0 gonna put the p30 manifold in with a integra type r throttle body how do i get alll the sensors working rite??? is it plug and play i kno the p30 is obd1
which manifold is better for my settup i got a b16a im gonna go turbo i got a itr throttle body 62mm and im putttin gsr cams in moving the rev limiter to 8500 should i stay with the stock b16a manifold or go with the itr manifold im gonna get a good deal on it so itz not a cost issue just dont...
can u drive with a tapped oil pan just the drain line on it but no turbo i just wannna put this pan on already just want to kno if oil gonnna come out of the line illl have it up just like if it was on the turbo kinda stupid question but i dnt give a fuck lol
im checking my wastegate spring b 4 i put it in my car.. what do i need??? im just checking when the wastegate actually starts to open.. and i wanna kno were i can buy what i need to test it
i wannna run 3inch downpipe on t3/t4 2.5 inch straight pipe 2 stock exhaust no cat or resonator... i would do the whole thing 3inch but i already got 2.5 inch piping wit the stock exhaust welded on no flanges the whole exhaust is 1 piece... am i gonnna be building up to much backpressure??? im...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.