Since i dont have the CRX anymore i was forced to goto OBD1. I have the PW0 out of the CRX. Its a stock un-chipped pw0. Vtec kicks in at 5k and redline is 8200. Great for a LS/vtec in a 90-93 teg. I also have two (2) OBD0 TD22u dizzys. one the bearings were going bad so i bought the new one. I...
i know the HF is mpfi. I had one there pretty much a stripped down SI. so that means you get a SI harness. I stayed OBD0 cause it was cheaper. IF you go OBD1 you will need a dizzy, injectors, and a conversion harness. so its really up to you. a used dizzy will run you about 150, injectors will...
Just pick one up from a 90-93 teg. I had the same swap and thats what i used. I ended up going to a EG6 and getting a GSR tranny. You need to get one from the 90-93. The cable and hydro cluth disks are a little diffrent and wont swap over to the other tranny. The cable have a smaller hole for...
I did a break swap on my CRX but it was to fit the B16 in. I took DA front brakes from a 91 and put them in. I also robbed a 93 SI of its erar disk. I think thats the way to go if your trying to stay honda and under $300
no...no...no... all you have to do is get a ecu to run the motor. your stock harness will work fine if you do the right mods to it. Im not 100% fluent in the STD modles wireing, all we had to do to get CRX hf was re weld mounts and drop the ecu in and wire my extra o2, vtec and my knock sensor...
your going to need to get a vtec ecu thats obd0. you could get a ecu to run the motor then wre your vtec upto a rpm switch. I have a pw0 that could be re-chipped to run any of the vtec motors. its somewhat hard to find the obd0 stuff for a good price.
i will give you my old one with lumenescent gauges with the box and everything if you come get it from my pile of junk. mine redlines at 5 and goes all the way out to 8.
I personally went with stock mounts for my B16 in me EG. I have driven cars with kits and the motor shakes the car. Poly mount inserts do this as well. I like when my motor has alittle jump in it. im not pushing crazy amounts of power yet but im told you can put just as much power to those as...
sounds good will it be in or around oregon? Is BYOB, bring your own bong or beer? Too bad we couldnt rent out a strip and do some crazy swap. BYOB. BBQ, and drags. lets hope its here come on salem!
holy geeze man. arnt AWD better in the snow/rain whatever? All that for 12kmh. your just lucky you didnt damage more. i have had some friends curb there cars and you got a scratch compaired to what i have seen
if you wanna piece together a set you can get a axle back from flow master. thats what i did bought my cat for 20 and the center section for 100. flowmaster is nice. looks like a stock GSR muffler and has a crome tip i will take pics later today and get them to you
uh yeah that could be a problem. turn the key to the on position but dont crank it. the check engine light should come on and turn off after a few seconds. when the light is on you will hear the pump priming the system. do this 10-12 times and try to crank the car after that if no go you may...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.