well i dont know what else is done to the car i was told it had a built head that cost them 1100 but i have my doubts the motor has full cat back exhaust aem intake dc headers and thats about as much as i can see done to it... i just dont understand why another si stock will take off on me right...
ok well i was wondering something about my car what is the best ecu to run with a jdm b16a right now my car will red line around 8600-8800 i have a p2t ecu not sure if i could have a better one that will help me accelerate faster because its not as fast as some other si's i have seen.
hey everybody i have a em1 and ive had it for a while now but im not sure what i have been noticing... when i take off sometimes my car seems to like shake.. it seems like it is (wheel hopping) but it only dose it on first gear sometimes...and its not wheel hopping just seems like it is what...
go to rywire and see if they have one for this i bought a obd2b 8 pin adapter to work with a obd1 distributor so im pretty sure its possible. good luck
ok friend has a d16y7 in a 97 civic ek (auto) wants to do swap what will be needed?
some 1 locally is selling the motor auto trans ecu wire harness with the swamp for 400... so what will i need to complete the swap i know i need axle i dont believe my old ones work... so what else? i believe...
this is weird and im going from a 10 pin obd1 to a 8 pin obd2b so nothing to do with 96-98.. wich makes it harder i think ima give up and just buy a y8 dont wana buy a oil pump if im not sure it will work..:o
no problem man good luck and tell me how it goes you should email the guy today or as soon as u can to make sure you ordered the right one i almost got the wrong one sent out to me!
ok i have both motors out side by side the motor would not start when i did the swap so i took it out again this time adding the crank sensor but on my 95 ex motor d16z6 it dose not have the bolts for the sensor nor the thing bolt hole for the crank sensor now look at the pics below my y8 block...
oklay thanks! i also got a crank sensor already gonna pull the motor out when i can no time not work all week until next Wednesday so i will pull it out probably that day. thanks alot! for your help.
i have a d16z6 block. i dont have another place to wire the blue speed cable i dont have a p28 ecu i want to keep it obd2 i also already ordered the dizzy harness from rywire so yeah um lol yeah well ima wait and take the motor out again add the crank sensor and wait for a nother dizzy and...
im running the stock ecu the car came with wich is the obd2b harness since its a 99 and a it was a stock y8 head on it not sure how to tell wich ecu it is its confusing lol i can find out if u want. but yeah i mean im keeping the obd1 motor obd2b
ahh i will have to look at that mine is a 99 so the it is obd2b not obd2a so would i still check the white wires? i left the blue one unplugged wich is engine speed on the obd1 i believe correct me if im wrong. do you know if i will need a crank sensor?
Ohh okay Im going to losen that bonjo nut mm no I did not remove the dash just the motor and the. Crap around the battery n the fuses. ok tried it and it did not work.. still nothing since i my self wired the distributor to obd2 from the obd1 will it be a problem? i used it using this.. check...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.