Search results for query: *

Putting a b18c1 in a 92 hatch. A new engine thats not been run yet. The injectors (Guy told me they were aftermarket) that are on it had notchs that would not line up with my harness. Filed the notchs off so they would fit but now it floods when I try to crank it. The spark appears weak. Can't...

Hey, Putting a b18c1 in a 92 hatch. I have a edelbrock jg intake and trying to wire car vtec according to the diagram. I need to wire the car for secondary intake sensor but with this intake it isn't there is it? If its not wired will vtec work and not throw codes. Thanks :blink:

When I took the sensor(one wire 1992 cx) out of the manifold it screwed the threads. A new one is $273. 00 at advance. I have a four wire (1997 gsr). Can it be used obd1. Like to save the cash.

Anyone have a diagram on how all the coolant hoses run on a b18c1 in a 1993 hatch. I have a picture to email to show what I need just contact me. Thanks

The transmission in the hatch is shot (grinding and such). I know the casting will not work because of mounting and hydro vs cable, but will the internals out of the crx trans work in the hatch's casting.

I have a 1988 crx dx and a b18c . I put a b18a into a 1989 crx si about a year ago and it was plug and play. This one needs more though. The engine is a b18c1. It has been bored .020 with eagle crank and rods, J&E 10.5/1 pistons still has stock cams with eldelbrock 4760 intake. It was built to...

:worthy: 92b16vx,crx-si,MaaseyRacer,Slammedb18acivic,SleEPer_CRX. I know it took a long time but thanks for your help. I have to admit being and old v8 guy I was impressed with the b18 in a rex. Quick and great milage. I know I'm old but there is just somthing about Z/28 emblems and v8's jaring...

Swapped it all out and now it won't start. I have spark and shot starting fluid in the air cleaner but it will not crank,pop,crack or anything. Stuck a screwdriver in the plug wire and it will jump spark a half an inch. Set #1 on tdc and checked all the plug wires it looks good. The b18 uses the...

The manual for the crx said to use 10w30 oil for the trans. Is it the same for the s1 teg also? Anyone know how much goes in it other than pour till it runs out the plug?

Do all honda four cylinders have the same wire location and firing order. I have a diagram for the d16 that came in the crx. If not how do I wire the 91 b18a1 teg engine. Thanks

The one circled in red is the dashpot diaphram right? The one circled in blue is unknown to me? The one in yellow is the fuel pressure regulator ? This is a 90 or 91 b18a1 Thanks My Webpage

Put these axles in the crx and when I tightened down on them the wheels locked up. Took it apart and seen the dust shields crushed the rubber seals on the axels. The teg ones are bigger. Do I need to put the teg bearings in the crx or do I need to change something else. I removed the metal race...

The axels are out of a 90 integra. The outside boots are shot. Do I have to take the balancer and everthing else off one end just to put this on? Where can I get just the bands to put the balancer back on with? Also my shift linkage has no rubber bushing at the trans. Do I have to get this from...

Just got the b18 bolted in. Got down to the picky stuff you always hate. Is the firing order on the b18a1 the same as the original d16? Are Spark Plug wires in the same place on the cap? I see now the cap and rotor button are different but will the wires off the d16 work on the b18? Also my...

When I put the 1988 crx si wiring harness on the b18a1 teg I have a sensor left over with no wire for it. Here is a picture of the b18a1 with the unidentified sensor circled in red. https://hondaswap.com/gallery/images/s3...9488147530d.jpg

Still swaping the b18a1 into the 1988 crx. I have used the factory wiring off the original motor but have hit a wall. It has a solinod looking thing on the back of my fuel injection with a two pronged plug and I have no wires left to plug in to it. I can send a digital picture of it to anyone...

The axles for my swap are in disrepair. They seem to be in good shape as far as being tight but the boots are torn. I know they will not last like this. While at Auto Zone the other day I seen new boots. Are these a pain to put on? Do you need a special tool to put the bands back around the...

Putting a b18 in a CRX. The HCP kit came with only three mounts. Another guy told me that you don't use the side trans mount under the radiator anymore. Just wondering if the engine and the car both had four mounts from the factory don't they both need four now! Or is it where the new mounts are...

Swaping a b18 in place of a d16. Did I read the part about the front cross member mount being a option correct. This is a three mount kit. If I want four mounts do I use the stock d16 mount on the b18 or the b18 teg mount for the front crossmember. This is my first swap I'm a tad confused.

Awhile back I sort of trashed these guys. After the mount kit came in it actually looks pretty good. Just wanted to say they did come through in the end. BUT LET ME MAKE IT CLEAR TO ANYONE ELSE. You could die of old age before what you ordered comes in. It took four weeks and two angry phone...