Search results for query: *

:worthy: 92b16vx,crx-si,MaaseyRacer,Slammedb18acivic,SleEPer_CRX. I know it took a long time but thanks for your help. I have to admit being and old v8 guy I was impressed with the b18 in a rex. Quick and great milage. I know I'm old but there is just somthing about Z/28 emblems and v8's jaring...

I think this is a picture of what he is talking about. I asked the same question awhile back and no one knew what it was then either. https://hondaswap.com/gallery/viewimage...9488147530d.jpg

Swapped it all out and now it won't start. I have spark and shot starting fluid in the air cleaner but it will not crank,pop,crack or anything. Stuck a screwdriver in the plug wire and it will jump spark a half an inch. Set #1 on tdc and checked all the plug wires it looks good. The b18 uses the...

The manual for the crx said to use 10w30 oil for the trans. Is it the same for the s1 teg also? Anyone know how much goes in it other than pour till it runs out the plug?

Do all honda four cylinders have the same wire location and firing order. I have a diagram for the d16 that came in the crx. If not how do I wire the 91 b18a1 teg engine. Thanks

The motor trans axles all came from a 90 or 91 integra upside down donor.

Ya'll left me out . Po white trash!!!!!!! :lol: :lol:

The one circled in red is the dashpot diaphram right? The one circled in blue is unknown to me? The one in yellow is the fuel pressure regulator ? This is a 90 or 91 b18a1 Thanks My Webpage

Put these axles in the crx and when I tightened down on them the wheels locked up. Took it apart and seen the dust shields crushed the rubber seals on the axels. The teg ones are bigger. Do I need to put the teg bearings in the crx or do I need to change something else. I removed the metal race...

Just put a b18a into a crx now you are all trashing the tranny. Just wondering why?Because the gears are to far apart? New to all this its just a question. I think its a A1.

The axels are out of a 90 integra. The outside boots are shot. Do I have to take the balancer and everthing else off one end just to put this on? Where can I get just the bands to put the balancer back on with? Also my shift linkage has no rubber bushing at the trans. Do I have to get this from...

Just got the b18 bolted in. Got down to the picky stuff you always hate. Is the firing order on the b18a1 the same as the original d16? Are Spark Plug wires in the same place on the cap? I see now the cap and rotor button are different but will the wires off the d16 work on the b18? Also my...

I'm gonna try the stock ecu first. Been told it will run it just not at peak output. When Chris has more cash he said something about having one burnt with a header and cold air intake.

When I put the 1988 crx si wiring harness on the b18a1 teg I have a sensor left over with no wire for it. Here is a picture of the b18a1 with the unidentified sensor circled in red. https://hondaswap.com/gallery/images/s3...9488147530d.jpg

Here is the picture. I'm computer challenged so if it don't work bear with me. It's a si and I took the wiring harness off the original engine and put it on the b18. After a closer inspection I don't see a plug on the b18 harness for this either. Could the wire for it come from somewhere else on...

Still swaping the b18a1 into the 1988 crx. I have used the factory wiring off the original motor but have hit a wall. It has a solinod looking thing on the back of my fuel injection with a two pronged plug and I have no wires left to plug in to it. I can send a digital picture of it to anyone...

Thanks for the help guys. I think the hasports would be better but I'm just swapping not buying or owning. Chris has already bought these mounts (HCP) so nothing to do but use them. I'll go with three its stock anyway. If its like the last one it will not take him long to blow it anyway. I'll...

The axles for my swap are in disrepair. They seem to be in good shape as far as being tight but the boots are torn. I know they will not last like this. While at Auto Zone the other day I seen new boots. Are these a pain to put on? Do you need a special tool to put the bands back around the...

Putting a b18 in a CRX. The HCP kit came with only three mounts. Another guy told me that you don't use the side trans mount under the radiator anymore. Just wondering if the engine and the car both had four mounts from the factory don't they both need four now! Or is it where the new mounts are...

Swaping a b18 in place of a d16. Did I read the part about the front cross member mount being a option correct. This is a three mount kit. If I want four mounts do I use the stock d16 mount on the b18 or the b18 teg mount for the front crossmember. This is my first swap I'm a tad confused.