93 civic hatch with a 97 d16y8 swap. Having trouble with where all the vacuum lines and hoses go, i was given a link that would of helped but I can not view the pics that link brings me too. I also need help with where the purge control solenoid valve gets wired to. I'm innthe home stretch of...
93 civic hatch d16y8 swap. Giving this car to my daughter since she just got her license and almost done getting the car back together. I took out the d15 that was in here and dropped in a d16y8, put a skunk2 intake manifold on it and it's been so many years I can not for the life of me remember...
I swapped a d16y8 in my 93 non-vtec hatchback. Almost done with wiring everything, but I have the iab that I can not figure out where the plug is. The harness I'm using I believe is off a 93 or 95 del sol. There is no iab plug in this harness, I have the plug of the iab but not sure where to run...
I have a 93 civic hatch with a d16 swap. I'm not getting any power to the fuel pump. I have power ar the relay on the yellow an green wire 10.8v, I have 11.8v on the green with yellow wire on the relay. If I run 12v to the pump it will kick on. I have power to the injectors. I just can't get the...
My son has a 93 civic hatch. It had a d15 non vtec, and we just put in a d16y8. Went to wire the vtec so I looked up the pin out and it says run the vtec wire to A04 its supposed to be a orange with white wire. This car has an orange with black wire. I don't wanna start messing with stuff until...
My buddy has either a 00 or 01 civic, he got cut off and ended up rear ending the person. After that he can't get his car started. It won't even crank. He has all power and electronics but still won't crank. He asked me of I can take a look at it for him and just wanted to get a good check list...
i just recently bought a 95 civic dx with a 1.5. the clutch was slipping really bad when i bought it so i bought a clutch kit and put it in. i bled it an got that all set. when i went to go drive it i noticed that the clutch was grabbing at the very top almost when my foot was off the pedal. But...
I have a 98 lincoln navigator with a freaking boat load of problems. Heres the list of what its doing and then ill give a list of what ive done. Any and all help is seriously needed and appreciated. The truck wont idle past 600rpms and when first started bounce from 400rpms to 600rpms. It will...
ok i swapped a b18b into my friends 93 bubble back. he originally had a b18a that he blew up. i took the dizzy, intake manifold and harness off the b18a and put them on the b18b. everything is hooked up xcept the egr valve cuz theres no plug on the harness for it and various vac hoses that were...
ok i figured out how to set the timing on my 93 hatch with a 95 b18b swap. the problem is i dont have the timing cover to line up the orange mark on the crank pulley. i got my hands on a timing light but honestly ive never used one. also i cant get the car to run either. all this bs to help my...
i have a 93 civic hatch with a 95 b18b swap in it. i had to do a head gasket in it, so i marked where the cams, distributor and timing belt were. i got everything but now i cant get it to start, itll crank but not run. i have spark going to all cylinders. so i figured maybe the timing is off...
ok i swapped a 93 h23 into my 93 accord. car runs, (like shit) but still runs. my main problem is ive swapped out 2 different clutches, pressure plates and trannys. but no matter what i do the clutch slips. im in first gear doin 30 mph and im freaking red lining the car. the clutch is bleed...
i have a 93 accord. i cant get my drivers to open. all the rods are connected to the box inside the door that latches the door shut. no matter what i do i can get the door to unlatch. i called honda and they couldnt help me with it. can anyone please help me? im gettin tired as hell of climbing...
i have a second gen rx7 turbo for sale. the turbo was rebuilt and has no miles on it since it was rebuilt. was gonna put it on my 93 h23 but decided not to use this turbo. im asking $250 obo for the turbo with down pipe. PM me or email me with questions. dragon02165@yahoo.com
i have many different parts for h and f series.
1. H series head with valve train - $150
2. H series head with out valve train - $100
3. H / F series transmissions x2 - $175 each
4. H series intank manifold - $75
5. H series distributor - $125
6. F series head with valve...
i swapped an 93 h23 in my 93 accord. my dumb as forgot to change the clutch before i dropped the motor in. im running low on money at this time and have the clutch from the f22 that came out of my accord. i was told by a local honda dealer that the clutch will fit on my h23. my question is can...
ok i figured out why i have a loss of power when im driving, my timing is one tooth off. i have never had to screw with timing. can anyone tell me the easiest way to do this? also i have a set of skunk2 stage 1 race cams is it worth dropping those in now since the timing is already off? how or...
another question, i had to bleed the clutch, in my 93 accord with an h23 swap. i did this for a good 20 minutes cracking the bleeder open pressing the clutch dwn, closing the bleeder pulling the pedal up and all i can get is very little squirts not a constant stream. now should it take that long...
i just swapped a h22a1 in my 93 accord. i need a vacuum line diagram so i can finish everything up. also im drawing a blank on where the hell to connect the fuel pressure regulator to. can someone please help me.:confused::confused::confused::confused:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.