Search results for query: *

I purchased a Walboro fuel pump, but it needs to be spliced into the line... I was assuming it would be an intank unit... The question I have is, do I splice it, and connect to the same power source as the factory pump?? Do I keep the factory pump on, or do I disconnect it, and only use the...

Hey, Well... Question number 1.... I am going to be running 6 pounds of boost on a D16A6 engine, but what fuel pump will should I use? Can I use an inline Vortech T-REX with a 50/70 Calibration? [I really don't know what that means]... I have a Vortech FMU with a 12:1 , Missing Link, Acura...

Hey, I am turboing my D series honda engine, and I am stuck on what fuel management system I should use... What do you guys think? What are the advantages/disadvantages of both, and what features will I get from using an SAFC.. Also, what do I need to run an SAFC.. I know with the FMU I...

Hey, okay, I did the DX to Si swap.. I got spark... I got fuel... no ecu codes, everything is hooked up in the right place... but the engine won't fire... It cranks over, sounds healthy, but she won't go.... the engine was pulled out of an 89 Si from the wreckers with 7o,ooo Km's on it. The...

Hey, I am doing my DX to Si swap, and I am not getting any power to my injector resistor box.... I have connected both of the fuel injector [DX] black and yellow wires together, to connect to the yellow and black one coming out of the injector box, but they are not giving off any power? I...

Hey, I just finished hooking everything up, turned the key....... and nothing.... the starter cranks, but the engine doesn't seem to be firing. I am getting code 10... Intake Air Temperature, and code 20.. Electrical Load... Can anyone please give my some advice on how to fix this problem...

Hey, I am not sure if I hooked everything up right, or I have extra plugs, or something is missing from my harness... but anyways..... I have one extra plug from the stock DX harness.... which I think is supposed to be okay, but then I have this square two pronge plug on the back/bottom of the...

Hey, I have a 90 Si engine and I want to know if I can put it on with the 88 DX tranny. The only problem that I see, is that the clutch is 20mm larger on the Si... If I swap the flywheel, and clutch to the DX tranny will I be able to run this setup? Or, If I swap the DX flywheel to the Si...

Hey, I am swapping in a 91 si engine into my 88 DX... Is there anything I should know about this swap before I perform it.... besides the difference in ECU, wiring, injector box... etc... I know its simple, but its still an upgrade from a DX.. I know that the DX tranny has 21 splines...

I am considering pulling the stock engine out of my 88 CRX DX.. I would like to know if swapping in a d16A1, or d16a3 engine is similiar to the ZC engine swap. The D16 was located in the USDM Integra, while the ZC in the JDM. The only difference I have been able to determine is that the ZC's...