Search results for query: *

Guys my uncle gave me a wiring harness and say that it was off a prelude motor he had a while back . How can I tell what OBD 1 , 2a or 2b. It has grey plugs. It is only the engine harness no computer harness ends is on it . help guys.

I did the conversion from a OBD0 to a OBD1 ECU was smooth and with no idiot light .I got the ecu re-map to handle 18 psi of boost and was running sweet all day.It was also done with the help of this site thanks again to MR Brian. A.K.A. pissedoffsol. :worthy: :worthy: :worthy: :worthy...

I am planing to buy a stand alone engine management system in the next 3 months,but for now I bought a turbo chip off ebay a pwo chip .After have the socket install by radio shack tech I placed it in the car and starts it ,after it starts the red light in the ecu stays on and the check engine...

The Crx has made it to the magazine . It is in the April issue,it is the yellow front mount that looks like it was painted with a broom and got beat by a VW VR6, but we are having that re run on the 4th of April.anyway the guy that is in the car is my friend from Jamaica that pilots a 10sec 92...

blue/white red/green green/yellow These wires were broken off the harness side which connects to the ecu. I looked at the plugs A,C,and D and saw that there were bits of wires broken from each plug . This car is a 1996 JDM integra type r with an OBD 2a P73 ECU, Can someone tells me where...

It would be useful if there was an aera where all the torque specs for the bottom and top end for the B16A motor like the CON ROD and MAIN bolts etc. Thanks for some useful info........

I am building a motor to put in my CRX . This block has Je Pistons Carillo rods re-sleeved ,solid deck arp head studs. I am now thinking if i should buy the GREDDY E-MANAGE or the high price HALTECH?????? The block remain with its 81mm bore 9:1 CR.i want to get a Z10 block girdle, Does any of...

I took the turbo off to get the manifold welded for cracks,put it on and the car just wont start.I pull the#1-4 plug leads off put a screw driver in try to ground it and start it at the same time but there is no sparks coming .I was told that it might be the igniter that is gone bad .Can this...

My turbo T3T4 is leaking oil in the compressor housing. Where in florida re-builds Garrett turbos???????? Can someone recomend me to a shop in Florida that does these kind of repairs.

It will be like 68psi when it starts ,then after 5 mins it lowers to 20psi then after a few races it will drops to 5psi or even lower at idle.Why is this . The motor is a B16a turbo............. How can I improved my oil pressure?? very concern !!!

I have a B16A crankshaft forsale 1994 honda civic JDM SIR Also stock rods and pistons with rings. I am in the Caribbean.

http://www.wheelsjamaica.com/wheels_forum/...824121073949852

I would like to know with the help of good understanding how to conect a injector control box from a 1991 CRX to a 1997 Civic Sir with a B16A motor and a P30 ecu?I have a solid deck block to turbo and i want to add bigger injectors .Hel will be much appreciated with the help of a picture...

There are few question I come across each day, people just do not understand what is injector duty cycle.Stuff like how do I know when my injector is maxed out?.So guys lets have some info on this topic. :spin:

I would like to know if there is any company that makes an adapter for the PWO which is an OBD0 ecu so that it can be adapted to a P30 which is an OBD1 ecu. Anyone who have seen or know of this can email me . k_fletcher10@hotmail.com or leave a number so i can call.

Can anyone show the pin out for the 88-91 PW0/PR3 .I did a swap then add a turbo with large injectors ,so I am putting a apex S-AFC to control the injectors but I neeI have a PW0 ecu and i did a swap turbocharged I am using some large injectors so I need to know the pin outs of the ecu so I d to...