i swaped a 2000 b16a2 in a 97 ex. The car had a crvtec in it before so the wiring harness had already been modified for a b series so i just swapped the 97 ex harness on the b16 and plugged it into a Obd2a p30 ecu the wiring harness and the ecu worked fine with the crvtec and the si motor worked fine in the si. everything is puluged up and looks right but when i started it the first time it ran for two blocks hesitated when i tried to get on it then the dash lights flashed and the car died and the ecu made some clicking noises. i got it back to my house and looked it over and now all it will do is crank once or twice and then make some clicking noises. the battery is not dead or anything the clicking is comming from the ecu. also when it cranks the spedo raises to like 40mphi have gone over everything and i am lost. it is throwing 8 TDC sensor wich is in the dist. is there a difference between the 00 si dist. and the 96 gsr dist i had on the crvtec? the wiring looks the same on both dist's please help