caboose
USDM to the bone
Hello, My CRX HF with the D15B6 has a idle that bounces up and down between 1000 rpm and 1250 rpm. I have now tried Cleaning the original 3 times, replacing it with an Si one I had sitting around, and replaced that with one from a junkyard.
When the TPS or IACV are unplugged it works fine. I am not getting any engine codes. If I plugged the crank case breather, I could get it to idle smoothly, but that only worked until I went to back it up, and it came right back. I have checked all of the vaccume lines coming off of the manifold.
I really don't think that all of these IACV are bad, so I'm running out of ideas. Possible MAP?, would that even cause this? That's the only other thing that I can think of.
When the TPS or IACV are unplugged it works fine. I am not getting any engine codes. If I plugged the crank case breather, I could get it to idle smoothly, but that only worked until I went to back it up, and it came right back. I have checked all of the vaccume lines coming off of the manifold.
I really don't think that all of these IACV are bad, so I'm running out of ideas. Possible MAP?, would that even cause this? That's the only other thing that I can think of.