Hi everyone,
I'm from Chile, South America and I'm starting to make my first swap, I have a '96 Civic hatchback with it's stock D16Y7 engine.
Parts I've got so far:
- The engine, a '99 B16A2 from a civic SI, this engine is a OBD2b.
- The ECU, a P72 OBD1 from a Integra GSR.
- Throttle cable from a '99 civic SI.
- Harness converter from OBD2 to OBD1, I've got this one since I'm usingthe stock D16Y7 wiring harness that's on the car right now.
- Avid racing motor mounts.
- 93 Integra LS axles.
Parts I don't have:
- Shift linkage, but I'm planning to adapt the one I have right now with some cutting and welding.
- Upper and lower radiator hoses, I think I'll find some custom hoses once I have the engine and radiator in place.
- Half shaft, Wich one should I use?
If you guys can take a look at the parts and tell me if I'm missing something it will be very helpful.
EVERYTHING I MENTIONED ABOVE IS DOABLE FOR ME BUT, THE VTEC WIRING IS GETTING VERY CONFUSING, I KNOW THERE ARE SOME THREADS AROUND THERE TALKING ABOUT THIS ISSUE, BUT I STILL CAN'T FIND THE ONE THAT WOULD SOLVE MY PARTICULAR SETUP, SINCE I'M USING MY STOCK D16Y7 WIRING HARNESS, A OBD1 P72 ECU AND A '99 B16A2 ENGINE FROM A '99 CIVIC SI.
CAN PLEASE SOMEBODY TELL ME WHAT DO I HAVE TO DO TO WIRE THIS THING UP.
THANK YOU GUYS, CHILEAN TUNERS WILL BE GREATFULL WITH THIS INFO.
SORRY IF MY ENGLISH IS NOT TOO GOOD.
I'm from Chile, South America and I'm starting to make my first swap, I have a '96 Civic hatchback with it's stock D16Y7 engine.
Parts I've got so far:
- The engine, a '99 B16A2 from a civic SI, this engine is a OBD2b.
- The ECU, a P72 OBD1 from a Integra GSR.
- Throttle cable from a '99 civic SI.
- Harness converter from OBD2 to OBD1, I've got this one since I'm usingthe stock D16Y7 wiring harness that's on the car right now.
- Avid racing motor mounts.
- 93 Integra LS axles.
Parts I don't have:
- Shift linkage, but I'm planning to adapt the one I have right now with some cutting and welding.
- Upper and lower radiator hoses, I think I'll find some custom hoses once I have the engine and radiator in place.
- Half shaft, Wich one should I use?
If you guys can take a look at the parts and tell me if I'm missing something it will be very helpful.
EVERYTHING I MENTIONED ABOVE IS DOABLE FOR ME BUT, THE VTEC WIRING IS GETTING VERY CONFUSING, I KNOW THERE ARE SOME THREADS AROUND THERE TALKING ABOUT THIS ISSUE, BUT I STILL CAN'T FIND THE ONE THAT WOULD SOLVE MY PARTICULAR SETUP, SINCE I'M USING MY STOCK D16Y7 WIRING HARNESS, A OBD1 P72 ECU AND A '99 B16A2 ENGINE FROM A '99 CIVIC SI.
CAN PLEASE SOMEBODY TELL ME WHAT DO I HAVE TO DO TO WIRE THIS THING UP.
THANK YOU GUYS, CHILEAN TUNERS WILL BE GREATFULL WITH THIS INFO.
SORRY IF MY ENGLISH IS NOT TOO GOOD.