anyone have this problem.

We may earn a small commission from affiliate links and paid advertisements. Terms

904drB20B

New Member
b20b with a s1 tranny, i got the flywheel and clutch for a 98 crv and my pressure plate doesnt line up with the flywheel????? :confused: not that anyone with an eg-ek/dc would run a cable transmission :huh: but any info is greatly appreciated :D
 
you need the flywheel and clutch for the transmission you have, not the engine it's mated to. so you do have an ls cable trans then? if so you need to be certain whether its 90-91 or a 92-93. the later model years had a 1/16" larger input shaft on the trans, so you have to make sure you order the right year clutch kit. flywheels so far as i can tell from all b-series are interchangeable
 
Back
Top