Axle Removal

We may earn a small commission from affiliate links and paid advertisements. Terms

SixtySecondAssassin

Senior Member
is there an easy way to take axles off? any tips or tricks would be highly appreciated. ive tried pulling the hell out of them but if i yank any harder im gonna pull the car off the stands.
 
thanks fellas. but the thing is its on the intermediate shaft side(drivers side) and theres no good flat surface to pry against. it kinda of dishes all the way around like so: ) ( . do you think a big ass ball joint splitter would work?
 
just hit the cv joint with a hammer
if it still wont com out just take out the intermediate shaft with the axle
 
Originally posted by tomtom@Jan 26 2003, 06:28 AM
just hit the cv joint with a hammer
if it still wont com out just take out the intermediate shaft with the axle

If you're trying to save your axles don't do this.
 
Originally posted by 92b16vx+Jan 26 2003, 01:19 AM-->
@Jan 26 2003, 06:28 AM
just hit the cv joint with a hammer
if it still wont com out just take out the intermediate shaft with the axle

If you're trying to save your axles don't do this.

:werd:

seriously- if you try to pry the axle out with a ball joint separator wedged between the tranny housing and the cv joint, and its not working, something is wrong with your axles/tranny
 
Back
Top