JayDeeEmDC4
Member
*UPDATE* I was getting code 23 along with my usual 20 so I traced the problem to 2 things, 1 being the connection where i hardwired in the plug wasnt soldered so I soldered it, and checked it, still got the code. So I checked the other end of the wire @ the ECU only to find it unplugged completely from the ecu (I have the wire shoved in to pin d3 cause I dont have pins) So i re"shoved" it in and reset the ecu by pulling the hazard fuse (10a) and the ecu fuse (7.5a)...Checked it drove for a few and it still came on again? Any ideas? Whats the chance that it was noty soldered, unplugged AND BAD!! The thing is it takes about 3-4 mns of driving for it to come on. Why is that? Anyone with experience please help me. Thanks